|
DISPLAYS
"We offer many products that
will affectively display your
painted or pewter figures."
Build
Your Own Music Box Display
We
now have a wonderful assortment
of tunes, turntables and a rich
walnut display base. You can mix
and match a tune (9) with
turntable sixes (3) for a
rotating presentation of your
small dioramas without an added
music box. (See illustrations
for various ideas).
|
MB1 |
Walnut Finish Music Box
Base, 4 1/2" Dia. |
$9.95 |
|
MB2 |
Clear Turntable, 1 3/4"
x 1/2" |
$1.95 |
|
MB3 |
Clear Turntable, 2 1/4"
x 1/2" |
$2.20 |
|
MB4 |
Clear Turntable, 2 3/4"
x 1/2" |
$2.45 |
|
MB5 |
Adhesive Mounting Pad
(package of 10) |
$1.25 |
|
MB6 |
Clear Turntable 3 1/4"
dia. |
$2.65 |
|
MB7 |
Clear Turntable 4" dia. |
$2.95 |
WOODEN DISPLAY BASES
Dark Walnut Finish. Beautifully
stained and lacquered furniture
quality pieces. Perfect for
displaying figurines. 3/4"
thick solid wood
(ROUND)
|
MB8 |
3" Dark Walnut Finish |
$4.50 |
|
MB9 |
4" Dark Walnut Finish |
$5.25 |
|
MB10 |
5" Dark Walnut Finish |
$7.25 |
|
MB11 |
6" Dark Walnut Finish |
$7.75 |
Oval
|
MB12 |
5"x3" Dark Walnut Finish |
$4.95 |
|
MB13 |
6"x4" Dark Walnut Finish |
$6.95 |
|
MB14 |
7"x5" Dark Walnut Finish |
$7.95 |
|
MB15 |
8"x6" Dark Walnut Finish |
$9.95 |
MUSIC BOX TUNES
Sankyo 18 note music boxes are
long playing while maintaining
full sound.
|
ACT 003 |
Funeral March of the
Marionettes |
$7.95 |
|
ACT 108 |
Frosty the Snowman |
$7.95 |
|
ACT 274 |
Santa Claus is Coming to
Town |
$7.95 |
|
ACT 263 |
Puff the Magic Dragon |
$7.95 |
|
ACT 279 |
Send in the Clowns |
$7.95 |
|
ACT 288 |
Skaters Waltz |
$7.95 |
|
ACT 174 |
It's A Small World |
$7.95 |
|
ACT 085 |
Entry of the Gladiators |
$7.95 |
|
ACT 016 |
Deck the Halls |
$7.95 |
|
ACT 023 |
Jingle Bells |
$7.95 |
|
ACT 029 |
Silent Night |
$7.95 |
|
ACT 053 |
Carousel Waltz |
$7.95 |
|
ACT 061 |
Off to see the Wizard |
$7.95 |
|
ACT 078 |
Be a Clown |
$7.95 |
|
ACT 200 |
Parade of the Wooden
Soldiers |
$7.95 |
|
ACT 203 |
Here Comes Santa Claus |
$7.95 |
|
ACT 255 |
University of Michigan
(Hail to the Victors) |
$7.95 |
|
ACT 402 |
Notre Dame Victory March |
$7.95 |
|
ACT 446 |
Camptown Races |
$7.95 |
|
|
Figure Display Case's
(clear rigid plastic, hinged
containers)
Show off your painted castings
in these beautiful display
cases. Figures displayed in
this manner are easier to sell,
much nicer to give as gifts, and
are protected from handling.
Three case sizes with a
colorful, foam-backing insert
are available.
|
G750 |
Display Case w/Foam
Backing, 2 7/8" x 2" x
1" |
$0.95 |
|
G848 |
Display Case w/Foam
Backing, 3 1/2" x 2
9/16" x 1" |
$1.15 |
|
G1198 |
Display Case w/Foam
Backing, 5 1/4" x 1
1/16" x 1 1/16" |
$1.65 |
|
CHESS BOARDS & BASES
|
MS78
|
Imported
Wood Chess Board, 17 3/4" x 17 3/4"
x 3/8" |
$52.95
|
|
MS94
|
Imported
Wood Chess Board, 19 1/2" x 19 1/2"
x 5/8" |
$66.95
|
|
WB1
|
(4)
Cavity Silicone Rubber Chess Base
Mold |
$0.30
|
|
WB1
|
Clear
Pawn, 5/16" Height |
$0.30
|
|
WB2
|
Walnut
Pawn, 5/16" Height |
$0.30
|
|
WB3
|
Clear
Bishop, Knight, Castle, 1/2" Height |
$0.40
|
|
WB4
|
Walnut
Bishop, Knight, Castle, 1/2" Height |
$0.40
|
|
WB5
|
Clear
King/Queen, 5/8" Height |
$0.45
|
|
WB6
|
Walnut
King/Queen, 5/8" Height |
$0.45
|
|
WB7
|
1/2
Walnut & 1/2 Clear Set, 32 pieces |
$11.40
|
|
WB8
|
All
Walnut Set, 32 pieces |
$11.40
|
|
WB9
|
All
Clear Set, 32 pieces |
$11.40
|
|
WB11
|
Pressure
Sensitive Green Felt Pads, (32) 1
3/16" dia., For Series 6,
14, 16, 23 & 31 Molds. |
$3.75
|
Finished wood chess
bases, WB1 through WB6 (also make
great individual figure bases) are quality
hard wood, beveled edges, varnished natural
wood (clear) or walnut stained and
varnished, 1 5/16 dia.
Protect your
Chess Board with Green
Felt Pads WB11
|
MS39
: WALNUT STAINED WALL
DISPLAY
3
Shelves, 2 1/8" x 10"
Overall Dimensions: 10 3/4" x 12"
Not
Assembled, includes hanging
hardware.
|
|
MS39 |
Walnut
Stained Wood Displayer (3 shelves)
|
$7.95
|
 |
MS83
: PRE DRILLED
HARDWOOD BASE FOR
SERIES 18 |
|
MS83
|
Pre-drilled Wood Base For Series 18
Molds |
$2.50
|
 |
CAROUSEL ACCESSORIES |
|
MS80
|
Revolving Wood Turntable |
$19.95
|
|
MS81
|
Drilled
Aluminum Balls, 7 per set |
$10.00
|
|
MS92
|
Drilled
1 5/15" dia. Wood Base |
$0.50
|
INSTRUCTIONS FOR ASSEMBLING A
MUSIC BOX
WITH THE WALNUT DISPLAY BASE
Instructions for assembling a music
box without a turntable.
1. Remove the 2 Phillips head screws from
the musical movement case.
2.. Remove the musical movement from the
plastic case.
3. Place the threaded windup spindle through
the large hole in wood base's circular
cover.
4. Rotate the wood cover so that the three
holes in the music movement are visible.
5. Insert the 2 Phillips screws you have
removed into any 2 of the visible holes in
the movement and tighten.
6. Using Elmers Wood glue or our Insta-Cure
Super glue run a glue bead around the
recessed rim of the display base.
7. Turn the walnut base over and insert the
assembly. Allow the glue to dry completely
before inserting the windup handle.
8. Attach your display piece(s) to the top
of the display base with FastSteel or
Insta-cure Super Glue for best adhesion.
Cover the turntable opening with a display
object or by using ground cover materials if
you are doing a diorama (see below).
Instructions
for assembling a music box with a
turntable.
1. Remove the 2 Phillips head screws from
the musical movement case.
2. Remove the musical movement from the
plastic case.
3. If you are using the MB5
adhesive-mounting pad remove the plastic
covering from one side and position the pad
with the knockout hole over the windup
spindle of the musical movement. Press it
firmly to secure it to the metal. Remove the
other side of the protective plastic
covering.
4. Align and place the windup spindle
through the underside of the hole in the
walnut base.
5. Press against the metal case to securely
attach the sticky pad to the underside of
the case.
6. To guarantee a secure mounting use a
Phillips screwdriver to screw in the two
3/8" flat head Phillips screws enclosed in
the plastic bag.
7. Using Elmers Wood glue or our Insta-Cure
Super glue, run glue bead around the
recessed rim of the display base.
8. Insert the wood cover and press securely.
Allow it to dry completely before attaching
the threaded turntable to the windup spindle
shaft.
9. Glue on a figurine to decorate the
turntable. If you want to cover the exposed
surface of the turntable spread a thin layer
of Elmers glue and cover with sand or other
material (see suggestions below).
Using the
Walnut Base for a diorama display without
a musical movement.
1. Using Elmers Wood glue or our Insta-Cure
Super glue run a glue bead around the
recessed rim of the display base and press
in the wood cover.
2. Position and glue a figure or some type
of ground cover (pebble or decorative piece)
over the exposed hole. Position and glue on
any of the display figures. If you wish to
decorate the exposed wood surface you may
use Elmers glue and materials (artificial
grass, sand or snow) available from the
train department of your local hobby store.
3. An effective ground cover is small grit
swept up near the curb on a street. |
